Відео

2010 camry 2.5 owner here. My check engine light flashes, car will start missing, and it burns oil. Quite a bit of oil. How likely is it that it could be a pcv valve and line? It runs fine at idle.

Awesome. This made this job straight forward. It took maybe 30 mins.

Good job. You work on things but don't tear stuff up. I have a feeling these 4x4 systems sit so much instead of the parts being activated that bits of corrosion etc can set up. Got a 2014 yesterday that somebody broke the dash 4x4-4x2 rotary switch knob off. It still lines back up and rotates. Thinking about applying strong super glue to the broken posts and see if it will go a bit longer. : ) If anyone has encountered that?

How do you know the old valve was causing the oil consumption? Did you just change a good one?

This is the best video out there!!! So here's my problem i was driving home in my 2016 F250 Diesel and all of the sudden my freaking brakes were hard to come to a stop so i freaked out and white smoke was coming out of the exhaust all at the same time!! I know my vacuum pump has been leaking for over a year now.... But does the vacuum pump failure cause white smoke to come out of the exhaust?....... Thank you!!! Arthur

So - getting ready to leave for a vacation, my hatch would not open. it would beep, but not open, I crawled in the back an use the manual latch switch to open the hatchback, but then would not lock when i closed it. Do you think it is just the latch or a combination? my hatchback is a powered lock.

Lucky you have 2010 camry and the PS is in the way. Everything is the same except the PS has to be in the way. How do I remove PS?

What suspension? Notched in the back?

Great video. My new to me Jeep had bead locks that were loosing/breaking bolts and needed spacers. Spacers caused the wheels to start leaking, so I'll clean them up as suggested and use the tire sealer and lock tite.

Worked !

Is this the 2.5 engine?

Bro this is so helpful. Hopefully it's just the fuse but if not I'll know where to go

👍 You might consider lowering the tire pressure for better traction.

Thank GOD for good people with good information! 🙏

I really don't want to do this damn job, but I can't justify spending like the 400 bucks or whatever I've been hearing quoted to replace it, knowing I have the damn tools and can make the time.

just did my 2008 grand cherokee today.. headlights look brand new!! awesome product!

Thanks you!

Don’t buy there stuff I ordered a set of radius rods in October and it was cold so I went to install them on Saturday and there employees gave me the wrong bushings I was told they would not make it right I was to pay for there mistake over a 20$ part !!!!!!! Right to ZRP I go !!!!!! This story will be told to everyone I know for sure !!!! 

Outstanding..... My 4x4 has not been working for over 3 months. You just saved me a lot of money. Had my truck scheduled for repair in two days, saw your video, tried it with some skepticism but it worked. Just spun the pin several times both ways and put it back together...Nothing else was needed..... Thank you. 2010 F-150 XLT 4X4 PS: I canceled my appointment! :)

Perfect!!! My 4x4 has not been working for over a year and got stuck a few times. Saw your video and gave it a shot before taking it in and it worked like a charm! Thank you so much! 2010 F150 XLT 4x4.

Are you a mechanic or DIY ? A mechanic told me there are signs that your pcv valve is bad like high idling , oil leaks and air leaks . Are these signs a fool proof sure way to tell if pcv valve is bad ? I've got oil leaks btt not the other signs . Major pain to replace mine . I've got to take off imtake manifol and a few other things or pay a shop . 11 Camry 2ARFE 2.5 L It's right by the intake manifold and HYDRAULIC POWER STEERING PUMP

Bad flim.'/# "we ployedx

They certainly make it difficult nowadays to remove/install a PCV valve. Back in the day, the PCV valve was installed in a rubber grommet that was atop the valve cover.....easy peasy to change.

<3

One of the best videos explaining the installation of the KIA Sorento Trunk Latch. I installed it myself and it did not take half an hour... Thanks BC Driven

You were unsure of what you were doing, but you did better than in the other videos I saw. It was still better to watch your disassembly than the others. Good job!

Yup! It really works. Thanks my guy ✌️

I will get my son to try it

Any idea where that would be on my 2022 sorento ex it has the 2.5 tubro

Thank you, not very handy but your video made it very very easy! Manual latch and was only $30 vs repair shop bs.

There are 2 look the same, which one

How long does this last for lifetime or temporary?

Thanks, I been looking for a solution like this for a long time that didn't require removing the entire intake manifold. Does anybody know if this method works for the models with power steering?

Thanks for the video. Gonna try this.

Wow bc very good job we always learn every day thanks for your time bro

this was harder to change then my ac compressor on my 2 g Scion tc

Thank you. I benefited greatly from your wonderful explanation of installing the lock and I changed the lock of the 2016 Kia Sorento.

Roxzillas would have spun just as much.

Good Video. Exactly the info what I was looking for.

Not on my 2008 f150 ext cab

"Period!"? I agree that the Sylvania kit is good ( I don't agree that it's expensive, it's under $20 ), but how do you know it's "the best. Period."? Project Farm does a good job of comparisons, and they are usually very objective. But even that channel usually gives its conclusions in less absolute terms.

Thx!

Take a little air pressure out

Mexican gives me premium gas.

This video was awesome! You have any videos for a sedona where the latch opens, but the door only goes up automatically on a random basis?

Have a 2012 f250 with the 6.7 Changed oil other day and it was jello, had a knock on bottom of motor after adding additional oil that went away ,And now the top passenger side is knocking ,Not a death knock but a Concerned knock, unsure if it’s fuel or oil related

Thank you for posting! Done just like you said, then took neg battery cable off, put back. The 4X4 works like nothing was ever wrong! 2010 F-150

the actuator is for the intake runners. i wish they put the pcv valve up on top of the engine like the 2 Az that was a 10 min job. or like on a small block ford or chevy 2 min job no tools required oh well I guess this is proof their making cars hard to work on

How do you know it’s a bad part and not a fuse?

Thank you, great money saver! Slightly different on ‘09 F150 but same principle.